The Change Set-up menu splits in many
powerful sub menus, which will be
described in detail below.
The screens available to you might differ
from those shown in this manual, if your
AV32R ‘Dual Processor’ has not all
hardware and software options installed. It
might also differ if the the software version,
loaded into the AV32R ‘Dual Processor’ is
different to the version used when writing
this manual.
The AV32R ‘Dual Processor’ incorporates a
Night Mode
, which reduces the dynamic range
for quieter listening, so that you can comfortably hear quieter passages at lower volume
levels. The loud elements (such as violent explosions) become slightly quieter and the quiet
elements (such as soft speech) become slightly louder.
Night Mode only works with Dolby Digital or DTS Digital Surround sources including
Night Mode control parameters.
To select Night Mode within the Change Set-up sub-menu use the
G
or
H
keys to toggle
from
Off
to
On
. Night Mode will remain selected until it is specifically switched off.
When the Night Mode is active, i.e. a DD or DTS DVD with the necessary night mode
parameters is replayed, the volume display will change from
VOL
on the front panel display
to
NIGHT
. The volume display on the on screen display will also change to
night
when Night
Mode is active.
You can also switch
Night Mode On
or
Off
using the
skip +
or
skip -
keys if the cursor keys
have been assigned to
quick settings
, as described on page 41.
Night Mode
can only work in the
main
zone.
zone 2
, if enabled, is either
Stereo
Downmix or
Dolby
Headphone (if enabled).
Change Set-up: DD / DTS Night Mode
|
45
DD/DTS night mode
Change Set-up menu
GRP00989.02-UK AV32R Dual.qxd 10/22/03 4:01 PM Page 45
