TAG
Heuer Timing
Page 6 / 49
4. Quick operation guide
The exceptional performance of Chronoprinter CP 545 is guaranteed with its simplicity of use, the hallmark of
TAG Heuer
timing philosophy
4.1. Battery installation & replacement / rechargeable NiMH battery
To op/the battery cover, use your thumbs to firmly push it in the direction of the arrow.
Insert the batteries, respecting the correct polarity, as indicated at the bottom of the compartment.
WARNING
To guarantee the security of your timekeeping, it is recommended to use your CP 545 with the
internal NiMH battery in a well-charged state, or with the Docking - BATT.
Always
remove the batteries if you don’t use your CP 545 for several days.
If you forget to do this, the batteries could leak and seriously damage the device. The warranty
does not cover this problem.
The time of day, the date, the memorized runs and the selected parameters are saved by a small
internal battery.
4.2. Switching the CP 545 ON and Synchronise
1) Press
ON
for 5 seconds
2) The LCD display will show
LCD Screen
a) 4 black bars indicating that the
external Inputs are blocked (1 to 4).
The time of day is memorized in the
CP 545 (internal or after a
SYNCHRO
).
b)
Symbol indicates that the power
supply is connected and the charge
of NiMH batteries
c) The
date
d) The memory available
e) The Timing Mode used the last time
f) How to enter the menu.
▬
▬
14:24:59
▬
▬
Date <DMA>
14/11/2007
Memory Available 25000
NET TIME
ENTER THE MENU
F
a)
b)
c)
d)
e)
f)
