CD-200-SET
Installation Guide
7
Operation
Calling at the door
Press the Bell
֠
֠
֠
֠
. A short tune will be sound,
wait for vocal answer. If authorized, the lock will
buzz for 3 seconds, and you may enter.
Opening the lock using the keyboard
Enter the access code confirm with
*
.
The lock will be open for the time value it was programmed.
Each key stroke is followed by a Beep sound, entering a false code or invalid pressing is
followed by a “Beeeep” sound sequence.
When exit the secured area press the bypass pushbutton, the lock will be open for the
programmed time value (could be set to different value than entering).
Answering a call from the gate using one of the telephones
When a ringing call is heard from the telephones (in a different rhythm than usual), pick up
the handset.
If the ringing was : long Beep followed by a short one – the call is from the main door.
If the ringing was : short Beep followed by a long one – the call is from the secondary door.
Speak with the visitor. After one minute the call will be disconnected.
To open the door – press “
1
”. The lock will be released for 3 seconds.
To disconnect the call with out opening the door - press “
0
”.
Answering a call from the gate while speaking in the telephone
If a signal is heard in the handset while speaking in it, answer the call by pressing on “
7
” and
then “
*
”. The telephone call will be held on with background music.
Speak with the visitor, identify from which gate the call is coming from.
To open the door – press “
1
”. The telephone conversation will be back to you.
To return to the telephone call with out opening the door - press “
0
”.
Calling the panel from the house
Pick up the handset. Press on “
7
” and then “
*
”. To switch between the doors press “
*
”.
Speak with the visitor.
To open the door – press “
1
”. The lock will be released for 3 seconds. And the call will be
disconnected.
To disconnect the call with out opening the door - press “
0
”.
