CD-200-SET
Installation Guide
2
General:
The CD-200-SET system is an access control system for private houses.
The system includes an entrance encoder "CD-200" and a telephone line
adapter unit.
The system enables speaking with visitor who is waiting at the door or the
entrance gate, using any telephone in the house including wireless.
The electric entrance locks can be released from remote.
Authorized family member can release the lock by entering an access code.
Two different entrance doors can be controlled by one adapter.
It is possible to install 2 panels or 2 encoders or combination.
No need to install intercom handset.
Optional bypass pushbutton enables easy door opening from the inside.
The device is environment resistant.
Features:
- Special ring on the telephones when the call coming from the panel on the entrance.
- Controlling two door panels (main and secondary) and two electric locks.
- Holding a call on hold with background music.
- Does not interfere telephone calls and telephone services as: call waiting, voice mail…
- Enables leaving messages on the answering machine if used.
- Programmable opening times.
- Can store up to 98 different access codes.
- The AR-200 adapter can be fitted to most of the domestic telephone exchanges.
Specifications:
Operating voltage: 12VAC 1000mA
Color: silver or bronze
Code length: 2-6 digits
Opening time: 1-9 seconds
Controlling electric or magnetic lock
(Normally open or normally closed)
Dimensions:
"CD-200" Panel (surface mount installation
only):
6-3/16"H x 3-12/16"W x 1-12/16"D
"CD-200-AV" Panel:
Face plate:
8.5"H x 4.63"W x 1.25"D
Back box:
7.5"H x 4"W x 1.25"D
Installation the adapter:
Setting the jumpers
Before installing the adapter, the adapter’s jumpers should be set according to the installation and the
type of the lock.
Jumpers JP4 and JP5 are located on the front of the adapter below the terminals’ row.
The adapter can be connected to telephone line or telephone exchange with special intercom line.
Jumper and use
open
closed
JP4
– using of dialing
line
using of dialing line
Operating without dialing line. For telephone
exchanges with special intercom line
Jumper and use
Jumper on 1-2 and another on 3-4
Jumper on 2-3 (default)
JP5
– lock control
12VAC voltage to the electric locks
Dry contacts to the electric
locks.
*
Recommended state.
Choose the installation location according to the following conditions (the communication box is the
most appropriate):
a.
Shaded place, water and high humidity resistant.
b.
Close to power socket.
c.
Close to the main telephone line coming to the house, not regular telephone socket.
d.
Installing near electric, cables, antenna tubing should be avoided.
Before the installation verify that the line is not ADSL.
In case of ADSL line, a splitter should be placed before the adapter. the splitter’s telephone outlet
should be connected to the LINE in the adapter. And the ADSL outlet should be routed to the computer.
