Operating the FlexSet
48
FlexSet-IP 280S User Guide
During Idle
[Trace]
Malicious Call Trace
is used to record the next
x
(a system-defined variable) calls to your FlexSet. A list of
these calls can be sent to a printer or terminal. See
Individual Remote System Services (IRSS) - Freedom on
.
[aTrace]
Attendant Call Trace
is relevant for Attendant Console only. Use Attendant Malicious Call Trace to set or
print a call trace for any station. See
Malicious Call Trace on page 201
[RoomSt]
Room Status (or Canned Messages)
is used to toggle the room status definition (or canned message) of
your station on or off. See
[aRmSts]
Attendant Room Status (or Attendant Canned Messages)
is relevant for Attendant Console only. Use the
Attendant Room Status feature to toggle the room status definition (or canned message) of any station on or
off. See
[BG:Fwd]
Boss Group: Call Forward
enables you to define the conditions under which incoming calls to your Boss
Group are forwarded to another destination. See
Boss Groups: Call Forwarding on page 68
[aFwd]
Attendant Call Forward
is relevant for Attendant Console only. Used by the attendant to program stations,
boss groups and ACD/UCD groups so that incoming calls ring at another destination. See
.
[Charge]
Call Charge
is relevant for Attendant Console only. This attendant feature shows the charges accumulated
per station. The attendant may reset and print the Charge Table content. See
[St.Set]
Station Setup
is relevant for Attendant Console only. Station Setup allows the attendant to define stations for
specific feature activation. See
Station Setup Features on page 208
.