background image

Station Telephony Features

84

FlexSet-IP 280S User Guide

Canned Messages

Canned Messages

Use this feature to set one of any 16 canned messages for your station. Any internal caller to your station sees this message 
displayed on the second line of their display panel until you answer the call.
Canned message texts are pre-programmed by your system adminitrator. They can be used to indicate your status (or any 
other pertinent information) to the calling party. Contact your system administrator for the list of canned message texts used in 
your organization. Use the 

Table  on page 85

 to list the canned messages available at your telephone.

NOTE! 

Check with your system administrator whether your Coral system supports the Canned Messages 
or Room Status feature. If your Coral system supports the Room Status feature (see 

page 169

), 

the Canned Message feature is unavailable.

Press 

[RoomSt]

 to access the Canned Messages options.

 

[RmStsx]

Press the required Canned Message soft key (

[RmStsx]

 where 

x

= 0 to 15, see 

Table  on page 85

to activate. The 

canned message appears on the top line. When activated, a bullet is shown next to 

[RmStsx]

, and next to 

[RmSts]

. To cancel, press the relevant lit 

[RmStsx]

 key again.

NOTE! 

The first canned message that you activated is the one that appears on the internal caller’s 
display panel. Therefore, to set a new message ensure that you cancel all previous messages.

Page 1

10:50

26 May 2007 Company xyz

user name

station number

↑→

[RoomSt]

Page 2

Room Status

↓→

RmSts0

RmSts1

RmSts2

RmSts3

RmSts4

Содержание FlexSet-IP 280S




























































































































































































































































































Отзывы: