Operating the FlexSet
42
FlexSet-IP 280S User Guide
Making External Calls
[Save#]
Save Number
is used to save the dial number of the called external destination. The saved number can then
be redialed by pressing
[Redial] [Saved#]
from idle
NOTE!
The saved number will remain in memory until another number is saved by repeating the above.
[Park]
Park
your call at your station so that you can pick it up at another system station. See
[CallWt]
Calls Waiting
is used to view the number of calls waiting for you during a conversation.
[FlshTk]
Flash on Trunk
is used to send a signal through the system to trunk lines in order to operate certain types of
features that are available on the second system. The second system is a telephone switching center, PABX or
another Coral system. This feature is also known as Calibrated Opening.
[Number]
Number
is used to briefly display the trunk dial number instead of the name.
[OCC]
OCC
is used for users connected with pulse trunks and/or when your FlexSet is defined with Auto Transfer.
This feature enables you to send touch-tone dialing (DTMF tones) over non-DTMF trunks and stations6 for
applications or services (such as Voice Mail) requiring DTMF tones. See
Other Common Carriers (OCC) on page 180
[Series]
Series
is used to mark an external call before transferring it to a third party. This causes the call to return to
you after the third party hangs up. This feature can
only
be used during conversation.
[AcctCd]
Account Code
is used to enter an account code for the current external call. The code is marked on the
SMDR printout. See
[Privac]
Privacy
puts your FlexSet into
Privacy
mode. This prevents other members of your Boss Group or ELA
Group from accidentally joining your conversations.
[ExHold]
Exclusive Hold
puts your FlexSet into
Exclusive
Hold
mode. This ensures that a call placed on hold can be
retrieved only at your station. If Exclusive Hold is cancelled, the call put on hold can be retrieved by any
other member of your Boss Group or ELA Group.