Station Telephony Features
183
FlexSet-IP 280S User Guide
Transfer (Xfer)
Transfer: Split Call
Split call allows you to alternate between two other parties, by pressing soft keys defined as Exclude Source and Exclude
Destination. The feature also allows 3-way conversation by merely pressing one of the keys,
[Source]
or
[Dest]
, when the bullet
next to that key is steadily lit. This feature can be activated in any sequence, any number of times. When you speak privately,
with either the Source or Destination, the other party is automatically put on hold.
Source:
the first party with whom a connection was made.
Destination:
the second party with whom a connection was made.
The following table allows identifying the progress of split calls when your FlexSet is not equipped with a message display.
Activating Split Call on conversation:
1. Press
[Xfer]
.
2. Dial the destination number and wait for an answer.
3. You can now alternate between the two parties and speak privately with one while the other is put on hold by pressing
the relevant flashing key.
4. Press the flashing
[Source]
to speak privately with the first party; or
Press the flashing
[Dest]
to speak privately with the second party; or
You can press
[3-Way]
or the key with a steadily lit bullet and then converse 3-way.
Keys
Status
Source
Dest
On
Flashing
Speaking privately with source (first party)
Flashing
On
Speaking privately with destination (second party)
On
On
3-way conversation