Tadiran Telecom EMERALD ICE, Руководство по установке

Страница: 29 / 154

Emerald ICE HD Voicemail Installation Manual
4-1
System
Pr
ogramming
4
4
System Programming
Emerald ICE HD Voicemail is usually programmed via terminal emulation by using
a computer connected through the DB ‐ 9 connector on the Emerald ICE HD
Voicemail unit. The system administrator can also perform some programming
functions through the System Administrator’s mailbox. Information on how to
program Emerald ICE HD Voicemail using the System Administrator’s mailbox and
keyset can be found in
Section 9
: System Administrator Mailboxes .
When programming Emerald ICE HD Voicemail, remember that the program
will always fill in leading zeros if and when they are required. This is true for
all the programming fields throughout the system.
When moving about in the programming screens it is important to know how the
navigational keys will work. All keys on the keyboard are active except for the
Control (
C
) and (
A
) keys. The
C
key is not used by the software. To press
an
A
‐ key selection like
A
‐
A
, press the
@
key followed by the
A
key.
Different keys may be available for different screens. Always reference the bottom
line of the screen for currently valid choices.
The following keystrokes may be used when navigating a screen:
t
. . . . . . . moves the cursor up one line at a time
b
. . . . . . . moves the cursor down one line at a time
r
. . . . . . . moves the cursor to the next field or position in the field or line
l
. . . . . . . . acts as a destructive backspace if the cursor is in a field
I
. . . . . . moves back one screen
D
. . . . . . moves back one screen
e
.. . . . . . moves back one screen
4.1
Programming Navigation