Tadiran Telecom EMERALD ICE, Руководство по установке

Страница: 115 / 154

Emerald ICE HD Voicemail Installation Manual
12-3
Mailbox
Gr
ou
p
Adm
inistr
ation
12
To create a new System Group:
1. Enter system programming by pressing
1
from the Status screen and
entering the system password (default=1234).
2. Press 5 for Group List Management
3. In the Group ‐ No field, enter the group list number (must be between 30
and 79), and press
R
. If the group has already been programmed,
the screen will fill with the corresponding entries.
4. If this is a new group, press
R
to move to the NAME field.
5. Enter the desired group list name into the NAME field. This name should
match the name which will need to be recorded for the group list using the
System Administrator mailbox.
6. Enter the first mailbox number in the grid box field. Press
R
to
move to the next mailbox field. Mailbox numbers can be entered in any
sequence. To enter sequential mailbox numbers, press
R
. The
system adds the next mailbox number to the list.
While entering the mailboxes, watch the bottom of the screen for
confirmation of your entries. If the mailbox number is valid, you will see:
[ICE]: 0000xxx(xxx=mailbox number entered). If the number you enter does
not have a mailbox in the system, you will see: [0000xxx]: Cannot be found
(xxx=mailbox number entered) . Check the mailbox number and try again. If
it still does not verify, you can always create the mailbox when you are done
here and then add it to the group later. The system also eliminates any
duplicated numbers when the record is saved.
7. When finished, press
5
to save the group list. The system prompts:
“Save Screen Information ? (Y/N).”
Undefined mailbox numbers are not saved. The system will prompt you as
follows: Error [ X Mailboxe(s) Could Not Be Found] Press
R
to clear
the message.
8. Press
E
to return to the Main Menu.
12.4
Creating A System Group List