The following applies in particular:
n
The operator must be informed about the applicable occupational
safety regulations and must identify additional dangers resulting
from the specific working conditions at the site at which the
fresh hot water station is used in a hazard assessment. This must
be implemented in the form of operating instructions for opera-
tion of the fresh hot water station.
n
The operator must be check whether the operating instructions
created by the operator correspond to the current status of regu-
lations, and modify them, if applicable, over the full term of use of
the fresh hot water station.
n
The operator must clearly assign and define responsibilities for
installation, operation, troubleshooting, maintenance and
cleaning.
n
The operator must ensure that all persons who work with the
fresh hot water station have read and understood these instruc-
tions.
Furthermore, the operator is responsible for ensuring the fresh hot
water station remains in a technically flawless condition. The fol-
lowing therefore applies:
n
The operator must take preventive measures against corrosion,
limescale and calcination in accordance with country-specific
regulations and standards.
n
The operator must ensure drinking water hygiene and the hot
water quality in the drinking water circuit in accordance with
country-specific regulations and standards.
n
The operator must ensure that the maintenance intervals
described in these instructions are complied with.
n
The operator must have all safety equipment inspected for func-
tionality and completeness in regular intervals.
n
The operator must ensure that the electrical circuit is equipped
with fuses in compliance with local regulations. Furthermore, an
electrical fuse must be provided exclusively for the fresh hot
water station. This fuse must be clearly labelled. An easily visible
description of the location of the fuse must be affixed to the
fresh hot water station.
TACOTHERM FRESH PETA 2 / PETA 2 X
Safety
V02.2020 11/2020
Item no. 215747
EA no. 1329
Operating instructions
18