V1 12/2021 | Art. Nr. 216221 | EA-Nr. 1374
Installation and operating instructions
taconova.com | 15
7.5 Time setting
Press the menu button „ “ at the bottom left to enter the selection
mode, press Press the „+“ „-“ button until you reach the „Time Set“
menu item, then press the „OK“ button to return to Time setting.
First the day of the week flashes in the display, press Press the
„+“ „-“ button to set the day of the week for which the settings are
made should be. Press the „OK“ button to set the day of the week.
Press the „+“ „-“ buttons to set the current hour. Continue with the
„OK“ button. Press the „+“ „-“ buttons to set the current minute.
Continue with the „OK“ button. „Time set“ flashes and after approx.
10 seconds the pump switches to normal operation. The current
time is now set.
7.6 Setting the speed level
The pump has three power levels.
The set level is shown in the display by these three bars.
The more bars that are displayed, the higher the set output:
Level 1 corresponds to 80% speed
Level 2 corresponds to 90% speed
Level 3 corresponds to full speed
Setting the speed control:
Press the menu button „ “ at the bottom left to enter the selection
mode, press Press the „+“ „-“ button until the „Speed“ menu item is
displayed. Press the „OK“ button to To get to the level setting, press
the „+“ „-“ button for the level setting. Finally press the OK button.
„Speed“ flashes and switches after approx. 10 seconds the pump to
normal operation. The desired level is now set.
TACOFLOW2 PURE PLUS