V1 12/2021 | Art. Nr. 216221 | EA-Nr. 1374
Installation and operating instructions
taconova.com | 13
You can now set the minutes for the switch-off time. Confirm again
with „OK“. Now The day of the week flashes again and you can
change the settings for the other days of the week make.
The settings are applied after approx. 10 seconds without pressing
a button. The pump automatically switches to normal operation and
now works with the set Times. You can change the times at any time
as described.
7.3 Smart mode
Press and hold the Menu button „ “ for 3 seconds to turn on Smart
mode. After switching on, the automatic symbol (
Ⓐ
) lights up and
the pump runs by default in the set temperature range for three
periods: 6:00-9:00, 11:00-13:00, 21: 00-23: 00. If the temperature of
the tap water is lower than the set start temperature, the electric
pump is switched on and runs until the temperature of the tap water
has reached the set stop temperature.
The time setting can be adjusted become. To do this, follow these
steps: With the smart mode switched on (the (
Ⓐ
) symbol lights up)
press the left menu button „ “, to enter the selection mode, press
the „+“ „-“ button to switch to the timer mode („Timing“ is then
displayed). Press the OK button. The timer symbol stops to flash and
the day of the week flashes. Use the „+“ „-“ buttons to select the
day of the week for which you want to set times. Confirm this with
OK. „Ti per“ flashes behind the number „1“. This is the first program
position for which times can be set. you you can now select two
further program positions by pressing the „+“ „-“ buttons.
Confirm the program location you want to change with OK. Now use
the „+“ „-“ buttons set the hours for the switch-on time. Activate
this with OK. Now the lights are flashing minutes and can be ch-
anged. Confirm with OK. The hours for the switch-off time will now
flash.
TACOFLOW2 PURE PLUS