Tacmina PZD Series, Руководство по эксплуатации

Страница: 46 / 80

45
Operation
Display Procedure Description
Stop the pump using the
[STOP/START] key.
Press the [MODE/SET/RESET] key a
few times, and when [%] appears on
the display, it is the percent setting
that is indicated.
✽
The initial value: 100%
Set the ratio (%) using the [ ↓ ] and [ ↑ ]
keys.
The ratio (%) blinks.
The value is entered if no keys are
operated for 2 seconds after completing
the setting, and the ratio stops blinking
and lights.
This completes the changing
of the ratio.
Press the [STOP/START] key.
The pump is set to the operating
status, and “STP” is extinguished.
Stopped
STP PS
%
MAN
spm
mL/min
STP PS
%
MAN
spm
mL/min
STP PS
%
MAN
spm
Operating
mL/min
STP PS
%
MAN
spm
STOP
START
STOP
START
MODE
SET/RST
Display Procedure Description
Stop the pump using the
[STOP/START] key.
Press the [MODE/SET/RESET] key a
few times, and when [spm] appears
on the display, it is the stroke-speed
setting that is indicated.
✽
The initial value: 300 spm (strokes/min)
Set the stroke speed (strokes/min)
using the [
↓ ] and [ ↑ ] keys.
The stroke speed (strokes/min) blinks.
The value is entered if no keys are
operated for 2 seconds after completing
the setting, and the stroke speed stops
blinking and lights.
This completes the changing
of the stroke speed.
Press the [STOP/START] key.
The pump is set to the operating
status, and “STP” is extinguished.
Stopped
Operating
STP PS
MAN
spm
mL/min
STP PS
MAN
spm
mL/min
STP PS
MAN
spm
mL/min
STP PS
MAN
spm
STOP
START
STOP
START
MODE
SET/RST
Display Procedure Description
The stroke speed (strokes/min) blinks.
The value is entered if no keys are
operated for 2 seconds after completing
the setting, and the stroke speed stops
blinking and lights.
Operating
Change the stroke speed (strokes/min)
using the [
↓
] and [
↑
] keys.
mL/min
STP PS
MAN
spm
mL/min
STP PS
MAN
spm
mL/min
STP PS
MAN
spm
Display Procedure Description
Change the ratio (%) using the [
↓
]
and [ ↑ ] keys.
The ratio (%) blinks.
The value is entered if no keys are
operated for 2 seconds after completing
the setting, and the ratio stops blinking
and lights.
Operating
mL/min
STP PS
%
MAN
spm
mL/min
STP PS
%
MAN
spm
mL/min
STP PS
%
MAN
spm
All models: PZD/CLPZD/ARPZD
Discharge-volume setting
The discharge volume can be set by one of the following methods.
■
Stroke-speed setting mode
The stroke speed (1 to 300 strokes/min) range is set in
1-stroke increments.
■
Ratio setting mode
The ratio (1 to 100%) range is set in increments of 1%.
If the screen shown below is displayed, the stroke speed
can be changed even while the pump is operating. If the screen shown below is displayed, the ratio can be
changed even while the pump is operating.
33-47̲PZD総合取説̲E.indd 45 33-47̲PZD総合取説̲E.indd 45 2010/07/20 14:24:11 2010/07/20 14:24:11