TACKLIFE DP0813W, Руководство пользователя, Страница: 7 / 22

GUIDELINES AND RECOMMENDATIONS FOR EXTENSION CORDS
When using an extension cord, be sure to use one heavy enough to carry the current your product will
draw. An undersized cord will cause a drop in line voltage resulting in loss of power and over- heating.
The table below shows the correct size to be used according to cord length and ampere rat- ing.
When in doubt, use a heavier cord. The smaller the gauge number, the heavier thecord.
AMPERAGE
REQUIRED GAUGE FOR EXTENSION CORDS
25 ft. 50 ft. 100 ft. 150 ft.
2.5A 18 gauge 16 gauge 16 gauge 14 gauge
1. EXAMINE EXTENSION CORD BEFORE USE. Make sure your extension cord is properly wired
and in good condition. Always replace a damaged extension cord or have it repaired by a qualified
person before using it.
2. DO NOT ABUSE EXTENSION CORD. Do not pull on cord to disconnect from receptacle; always
disconnect by pulling on plug. Disconnect the extension cord from the receptacle before discon-
nect- ing the product from the extension cord. Protect your extension cords from sharp objects,
excessive heat and damp/wet areas.
3. USE A SEPARATE ELECTRICAL CIRCUIT FOR YOUR TOOL. This circuit must not be lessthan
a 12-gauge wire and should be protected with a 15A time-delayed fuse. Before connecting the
motor to the power line, make sure the switch is in the OFF position and the electric current is rated
the same as the current stamped on the motor nameplate. Running at a lower voltage will damage
the motor.
- 06 -