TACKLIFE DP0813W, Руководство пользователя, Страница: 5 / 22

of untrained users.
5.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s operation. If damaged, have the power tool re-
paired before use. Many accidents are caused by poorly maintained power tools.
6.Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
SERVICE
Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
SPECIFIC RULES FOR THE DRILL PRESS
WARNING: Do not let comfort or familiarity with the product replace strict adherence to product
safety rules. Failure to follow the safety instructions may result in serious personal injury.
1.
TOOL PURPOSE. This drill press is designed for drilling metal, wood, plastic, and tiles. Drilling
other materials could result in fire, injury, or damage to the workpiece. Bits with a straight shank of
a diam- eter between 1.5 - 13 mm (1/16 - 1/2 inch) can be used. Using the machine for any other
purpose for which it is not designed may result in serious injuries, machine damage and voiding of
the warranty.
2.
MACHINE MOUNTING. For the operator's safety, the drill must be securely mounted onto a flat and
stable surface or stand.
3.
PERSONAL SAFETY.
● Always wear ANSI Z87.1-approved glasses with side shields, hearing protection, and a dust mask.
● DO NOT wear loose clothing or jewelry, as they might get drawn in by the tool. Tie back longhair.
● DO NOT wear gloves while operating this machine.
4.
ELECTRIC CORDS. Keep cords away from heat, oil, sharp edges, and moving parts of the tool.
Have an electrician replace or repair damaged or worn cords immediately.
5.
TOOL & ACCESSORIES INSPECTION. Before operation, check the tool and accessories for any
dam- age or missing parts. Do not use the tool if any part is missing or damaged. Make sure all
adjustments are correct and all connections are tight. Keep all guards in place.
6.
DRILL PRESS ACCESSORIES.
● Do not use drill bits or any accessories that are damaged or worn.
● Make sure all drill bits are sharp enough for the task at hand before using them.
● Make sure the drill bit is securely locked in the chuck.
● Use clamps or a vise to secure a workpiece to the table; this will prevent the workpiece from rotating
with the drill bit.
● Always turn off and unplug the unit before doing any cleaning or maintenance. Use a brush or com-
pressed air to remove chips or debris. Never use your hands to remove excess material and debris.
7.
WORKPIECE REQUIREMENTS. Check the workpiece carefully for splits, knots, nails, or other ob-
structions. These types of blemishes may cause a safety risk during operation.
8.
DO NOT drill materials without a flat surface unless a suitable support is used (a clamp orvise).
9.
SELECT THE APPROPRIATE SPEED for the task at hand. Start at a low speed and allow the drill
bit to ramp up to the operating speed before drilling into your workpiece.
10.
DO NOT operate this tool until it is completely assembled and installed according to the instruc-
tions.
11.
Make sure the table lock is tightened before starting the drill press.
12.
NEVER start the drill press with the drill bit pressed against the workpiece.
13.
PREVENTING ACCIDENTAL STARTING. Make sure the power switch is in the OFF position prior
to plugging in the machine. Always make sure the power switch is in the OFF position and the
machine is unplugged when doing any cleaning, assembly, setup operations, or when not inuse.
14.
Remove scrap pieces and other objects from the table and work area before turning the machine
ON.
- 04 -