TACKLIFE DP0813W, Руководство пользователя, Страница: 10 / 22

ATTACHING THE COLUMN ASSEMBLY TO THE BASE
1.
Place the column on the base, aligning the column flange
holes to the base holes.
2.
Install a hex bolt in each column support hole and tighten
bolts using an adjustable wrench (not included). See Fig. 2.
ATTACHING THE TABLE TO THE COLUMN
1.
Loosen the table locking handle (Fig. 3 - 1) so that the table
collar can slide onto the column.
2.
Slide the table assembly down directly onto the column,
with the silver side of the table facing up. See Fig. 3.
3.
Position the table directly over the base, and tighten the
table locking handle (Fig. 3 - 1) to secure table assembly.
CAUTION: The drill press head is heavy. Toavoid injury,
two people should lift it into position.
ATTACHING THE HEAD TO THE COLUMN
1.
Carefully lift the drill press head assembly and position it
over the column. See Fig. 4.
2.
Place the mounting opening on the drill press head over
the top of the column. Make sure the drill press head is
seated prop- erly on the column.
3.
Align the direction of the drill press head with the direction
of the base and the table.
4.
Tighten the set screw (Fig. 4 - 1) using a hex wrench.
ATTACHING THE FEED HANDLES
1.
Insert the three feed handles (Fig. 5 -1) into the threaded
openings on the feed hub (Fig. 5 - 2).
2.
Manually tighten the handles into the openings. If desired,
use the adjustable wrench to grip the flats of the feed
handles and fully tighten them into the feed hub.
NOTE: If an unusually-shaped workpiece interferes with
han- dle rotation, you can remove one or two of the feed
handles to allow for easier rotation.
MOUNTING THE DRILL PRESS
The drill press must be securely fastened through the mount-
ing holes to a stand or workbench with heavy-duty fasteners
(not included). This will prevent the drill press from tipping
over, sliding, or waking during operation. See Fig. 6.
IMPORTANT: If the stand or workbench has a tendency to
move during operation, fasten the workbench securely to the
floor.
Fig. 2
1
Fig. 3
2
1
Fig. 4
1
Fig. 6
2
Fig. 5
- 09 -