Tablerock Shortwave Daddy, Руководство по эксплуатации

Страница: 33 / 41

30
Swap INPUT_DEVICE and OUTPUT_DEVICE with the text you copied from
paman.
4. The audio should start playing over your computer’s speakers.
5. There are other possible methods of connecting the radio to Linux systems. If
you have developed your own method, please contact us and we will post it on the
Shortwave Daddy website, while recognizing your contribution.
If USB Port Fails to Operate after Disconnection and
Reconnection to USB Port (Windows):
There is a known issue with Windows 7 and some previous versions of Windows
regarding disconnecting and reconnecting a device to a USB port several times in
succession. When this occurs more than 3or 4 times without restarting the PC or laptop,
the USB port may stop working which results in no sound coming from the speakers.
Note: This issue is not the fault of the Shortwave Daddy and is solely an
issue with the Microsoft Windows operating system.
Microsoft is aware of the problem and has issued a Support Article discussing the issue
(Article ID: 817900 available at http://support.microsoft.com/kb/817900/en-us).
If this issue occurs after disconnecting and reconnecting the Shortwave Daddy, the
following procedures should be followed:
1. Restarting the PC or laptop usually restarts the non-functioning USB port.
2. Alternatively, without restarting the PC or laptop, the user can use Device
Manager to scan for hardware changes as follows:

In Device Manager, click your computer so that it is highlighted.

Click Action , and then click Scan for hardware changes .

Check the Shortwave Daddy to see whether it is working.
3. Disabling and re-enabling the USB controller may also reactivate the USB port as
follows:

In Device manger, expand the Universal Serial Bus Controllers :

Right-click the first USB controller under Universal Serial Bus
controllers , and then click Uninstall to remove it.

Repeat these steps for each USB controller that is listed under Universal
Serial Bus controllers .