Tablerock Shortwave Daddy, Руководство по эксплуатации

Страница: 31 / 41

28
Figure 26
6. At this point the band mode must be chosen. Push the first push-button (labeled
AM Mode) for the AM/Shortwave band.
The LCD display will flash ―CHANGING TO AM MODE‖
7. Test the operation of the PC or Laptop’s speaker sound system as follows:

Enter the frequency on the Keypad for a known AM broadcast band radio
station in your area. For example if you know that there is a station at 650
kHz, enter the station frequency in a five digit format, i.e. 00650 and then
press the ―#‖ key.

On the LCD display, the station frequency will be displayed along with the
RSSI and SNR information

Make certain that your PC or laptop’s speakers are turned on.
8. If the radio station is not heard through the PC or laptop’s speaker system:

For Windows, navigate to ―Control Panel‖. The location of ―Control Panel‖
will vary depending on your particular version of Windows.

Click on the ―Manage audio devices‖ tab

Click on the ―Hardware and Sound‖ tab

Under the Sound menu, click on the ―Manage audio devices‖ tab.

Click the ―Recording‖ Tab

Click on ―USB Audio Codec‖ so that it is highlighted