27
Mounting - coupling
1
Checking
Check that the machine is fitted with a main gearbox suitable for a swivel hitch. The gearbox
label, shown at
A
, must be green. This does not apply to models 4028 C - 4032 C and 4036 C
which does not have a label.
Models Taarup 4028 C, 4032 C and 4036 C
Check that the cylinder
K
of the machine is mounted in the hole shown. The hole
L
is used for
machines equipped with swath deflector.
2
-
3
P.T.O. 540 or 1000 r.p.m. selection
The swivel gearbox
B
can be mounted in two ways, to accept either P.T.O. 540 r.p.m. or 1000
r.p.m., input speed. The gearbox is mounted from the factory for P.T.O. = 1000 r.p.m. input
speed.
If the P.T.O. input speed is to be altered for P.T.O. = 540 r.p.m. the gearboxes must be removed and
turned through 180
o
so that the former input gearbox becomes the output gearbox and the former
output gearbox becomes the input gearbox. The breather plugs have to be moved to the top posi-
tion on both gearboxes.
If possible a gearbox for P.T.O. = 1000 r.p.m. should be used. This is especially important if the
tractor has over 70 kW at the power transmission (a high number of revolutions = lower torque at
the P.T.O. shaft).
The two splined shafts of the gearboxes have been marked from the factory with a label as shown
at
C
. Before starting up a new machine check that the gearboxes are mounted for the
required P.T.O. input speed, see page 64.
It is dangerous to couple a tractor with P.T.O. = 1000 r.p.m. to a machine mounted
with swivel gearbox for P.T.O. = 540 r.p.m.
4
-
5
Coupling with the lifting arms of the tractor
Adjust the right lift arm
D
to the same height as the left lift arm. The drawbar
E
should be
swung aside or removed.
Mount the machine to the tractor's lift arms and tighten stabilizer chains
F
, or fit stabilizing
struts.
Coupling between machine and tractor must be carried out according to directions.
The two linkage pins must be securely locked with heavy retaining clips. If the ma-
chine becomes disconnected from the tractor it could cause severe damage or death.
a
a
"Swivel Hitch Version"
Содержание 4024
