manualshive.com logo in svg

Taarup 4024, Руководство оператора

Поделиться
Скачать
Taarup 4024 Скачать руководство пользователя страница 17

17

1

WARNING.  Your body could be drawn into the P.T.O. shaft! Do not remove or open guards
before the machine has stopped rotating. The tractor engine must be stopped, the ignition key
removed and the hand brake applied.

Warnings for basic machine

2

WARNING.  Foot could be cut away! Do not remove or open guards before the machine has
stopped rotating. The tractor engine must be stopped, the ignition key removed and the hand brake
applied.

3

WARNING. Your body could be crushed! Do not work under the machine unless the cylinders are
equipped with safety devices 

S

. The tractor engine must be stopped, the ignition key removed

and the hand brake applied.

Transport: Fit safety devices 

S

 on the lifting cylinders in the right and left hand sides.

4

WARNING. Fingers or hand could be drawn into the chain transmission! Do not remove or open
the guard before the machine has stopped rotating. The tractor engine must be stopped, the igni-
tion key removed and the hand brake applied.

5

WARNING. Your body could be drawn into the machine! During all work with the rotor the
tractor engine must be stopped, the ignition key removed and the hand brake applied.

6

WARNING. Danger of stone throwing! Keep a safe distance from the machine. No persons are
allowed close to the machine when it is operation. If the tarpaulin is damaged it must be replaced.

Содержание 4024

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды