29
Drive wheel
Lift the wheelchair – see introduction and
figure 1
Take the plastic cover off the nut with a
screwdriver. Figure 5
Loosen the bolt in the center of the wheel with a 17
mm socket spanner and pull off the wheel from the
shaft. Figure 6
Before splitting the rim, let the air out of the tube,
by pressing on the valve – figure 7
Screw the 4 nuts out of the rim with an 13 mm
socket spanner – figure 8
Repair or replace the tube with a new one, and
assemble the wheel again
For tyre pressure see: 4 Technical Data
! Be aware not to squeeze the tube between the two
rim parts when assembling.
! Never inflate to more than the tyre is marked.
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
