19
10
ADJUSTMENTS
10.1
Setting the armrests.
Armrest cushion position relative to the back
is adjusted by loosening the 2 screws
under the horizontal tube with a 4 mm Allen key
(A1), and the 2 screws in the c-profile with a 6 mm
Allen key (A2)
Armrest height is adjustable by loosening screws (B)
on the armrest vertical tube with a 4mm Allen key.
Armrest cushion can be moved sideways by screwing
out the 2 screws in the armrest cushion with a 4 mm
Allen key (C) – The armrest must first be dismounted
by loosening the 2 screws (A1) (4 mm Allen key)
If the armrest is too loose or too tight to flip up
tighten or loosen the screws (D) with a 4 mm Allen
key and a 10 mm spanner
10.2
Swing- away bracket
The swing-away bracket is adjustable height if you
want to raise or lower the controller, or turning it by
loosen the screw (A) on the tube with a 4 mm Allen
key.
If the swing-away bracket is being offset on the tube,
the controller can be aligned by loosening the two
screws (B) under the control box with a 4 mm Allen
key.
The ball catch can be adjusted in hardness by
loosening the nut (C) with a 17 mm spanner, turning
the ball catch with a slotted screwdriver and tighten
the nut again while holding against the screwdriver
so the ball catch do not turn while tightening.
A1
A2
B
C
A
B
D
D
A
C
B
