16
8.4
Setting the power functions
The wheelchair may depending on model have the following power
functions:
Seat lift
Seat tilt
Back
Right legsupport
Left legsupport
The functions are activated by pressing the "Mode" button on the
control box, then there's a picture of power features (figure 1). Find
the function to be used by flipping the pages of the control stick.
When the feature is found, activate it by taking control stick forward
or backward, depending on which way the function should run.
Note:
When the seat is raised above 6.5 cm, the seat can tilt max 15 °.
When the seat is tilted more than 6.5° the seat can max be lifted 15
cm.
By seat lift more than 8 cm or by seat tilt more than 6.5° reduces chair
speed automatic with 15%.
Note:
To avoid over heating the actuators for electric functions they must
only work 10 % and then rest 90 %.
Lift actuator: 10 % (1 min. work 9 min rest)
Tilt actuator: 10 % (2 min work 18 min rest)
Back rest: 10 % (6 min/hour)
Leg rests: 10 % (6 min/hour)
Figure 1
WARNING!
Do not reach into the chair when the seat lift and seat tilt is activated because there is a risk of
entrapment between the mechanical parts.
WARNING!
Be aware of others, especially children, is too close to the chair when the seat lift and seat tilt is
activated.
CAUTION!
Place your feet on the foot rest before lowering the foot rest to avoid risk of entrapment between the
foot rests and the power chair.
