T-Drill S-80, Инструкция по эксплуатации

Страница: 8 / 90

INSTRUCTION MANUAL
8
3. GENERAL INFORMATION ON S-80 COLLARING MACHINE
3.1. INTRODUCTION
The construction of the unit consists of the covers, collaring machine body, spindle, a
clamping mechanism and positioning table.
The machine body and the spindle absorb the collaring stress. The feed stroke of the
spindle is servo controlled, which assures the achievement of an optimal efficiency and a
great precision. The spindle rotation is accomplished by means of a timing belt, directly
by the driving motor.
The S-80 collaring machine has safety devices in accordance with the CE requirements.
All this to guarantee that the T-DRILL S-80 unit is reliable even in heavy duty industrial
use.
3.2. THE PURPOSE OF THE MACHINE
The S-80 unit is designed for extrusion of collars to straight and bent tubes (using the
Manual feed table).
3.3. TECHNICAL SPECIFICATIONS
Type Unit S-80 collaring machine NOTE!
Type code 40231 Manuf. no. 118028
Max. run tube O.D. mm 114,3
Max. collar O.D. mm 88,9
Max. wall thickness of run tube mm 3.05 SCH10
Compressed air supply bar 6
Compressed air consumption l/min 70
Connected power kW 5 see machine plate
Fuse sizes A 3 x 32 A (max)
Operating voltage 3 x 400 V / 50 Hz see machine plate
Weight of the unit kg 2200
Weight of the electric cabin kg 110
Weight of the machine cover kg 330
Front cover (with trash drawer) kg 150
1 bar = 100 kPa