T-Drill S-80, Инструкция по эксплуатации

Страница: 42 / 90

INSTRUCTION MANUAL
42
6.2.2.3.5. POSITIONS
1
2
3
4
5
6
7
8 9 10
1. Positions List of manageable positions (Scroll up/down)
2.
Axises and
parameter
values
Values to adjust, tap numeric field to open keypad.
3.
Servo motor
axis list
Choose axis to move / check position from the pull down menu.
4.
Moving to a
certain position
“Actual position” field shows the current position, and the desired target
position is written to the “Target position” field. Tap the target field to
open keypad.
Start button moves the axis to target position, tap Stop button in case
necessary to stop before target.
5. Jog movement (+) and (-) buttons move the axis in steps (jog).
6.
Set actual
position for
selected axis
For setting of the actual position one selected, or all axis, after a
successful positioning.
“Set” sets only the one activated axis position line on field 2, “Set all”
sets all field 2 positions at once.
7.
Copy / paste all
positions
Activate a line from field 1, tap “Copy” to copy all field 2 information.
Activate another line from field one and tap “Paste” to paste all
information to field 2 of the activated line.
8. Save Tap “Save” after changing the settings.
9. Export
The button exports the information data to the predefined folder on the
computer C-drive (C:\T-Drill\).
10. Import
The button imports the information data from the predefined folder on
the computer C-drive (C:\T-Drill\).