ELECTRIC BICYCLE METER KT
—
LCD4 Product User Manual
- 22 -
After finishing P3 parameter setting, press
button (
SW
) to save the current set
values, then press
button
(DOWN)
to
enter P4 parameter setting interface.
○
P4 Throttle Startup Setting
Enter P4 parameter setting interface after P3 parameter setting is finished,
press
button,
P4 parameter column flashes.
P4 parameter setting interface
P4 is throttle startup setting, when P4 setting is 1, indicating the throttle is under
"
non-zero startup
" mode, namely, the throttle can be effective only after startup the foot
power assist. When P4 setting is 0, indicating the throttle is under "
zero startup
" mode,
the motor can be startup by the throttle directly. P4 setting range is 0 or 1, press
button (
UP
) or
button
(DOWN)
for selection. P4 parameter setting method is the
same to that of P2.
After finishing P4 parameter setting, press
button (
SW
) to save the current set
values, then press
button
(DOWN)
to
enter P5 parameter setting interface.
○
P5 Power Monitoring Setting
