ELECTRIC BICYCLE METER KT
—
LCD4 Product User Manual
- 19 -
button (SW) long for about 2 seconds, all can exit the setting environment and return to
display 1, meanwhile, the current set parameters are saved.
Under each setting interface, if there’s no button operation on the meter for more than
1 minute, and then the meter will automatically return to display 1, and the original set
parameters will be saved.
P Parameter Setting
After finishing metric/imperial unit settings, the speed and mileage units stop flashing.
Press
button (
DOWN
) to enter P Parameters Setting.
○
P1 Motor Characteristic Parameter Setting
P1 is motor characteristic parameter setting, P1 = motor gear reduction ratio× number
of motor magnet pieces, just rounding if there’s any decimal.
After entering P parameter setting environment, the first is to set P1parameter, P1
parameter column flashes. P1 setting ranges between1-255, press
button (
UP
) or
button (
DOWN
) for selection.
P1 parameter setting interface
Under P1 parameter setting interface, if there’s no button operation on the
