Systems Trading Corporation Easy2Build, Руководство по сборке

Страница: 29 / 60

Assemble Sides
!
You are assembling both sides in the following steps. Both sides are identical until step 6.1
!
Place all the parts for the sides on a level surface.
Make sure the pieces are in the correct positions before assembling.
Carefully follow the order of assembly to ensure an easy installation.
Wear proper safety gear including work shoes, gloves and goggles.
Line up the four profiles L03V so the holes are at the same position. Slide short side of connectors
S01 into channel of profile until the last hole in S01 lines up with third hole from the bottom on
profile L03V.
QTY
8
8
#S01
#S02
QTY
4 #L03V
Profile Connector
4.1B
Slide another connector S01 so it lines
up with the middle hole on profile L03V.
4.1C
Secure all pieces with S02
screws. Repeat to make four sets.
4.2B
Secure with S02 screw. Repeat to make four sets.
L03A
28”
(715 mm)
6 1/2”
(165 mm)
L03V
S01
4.1A
L03V
S01
IMPORTANT: The holes are not at the midpoint of the profile.
Arrange profile so the 28” portion will be the bottom when standing.
L03V
S02
S02
Lay out profiles L04D so the holes are at the same position. Slide short side of connector S01 into
channel of profile, lining the last hole in S01 with the hole on profile L04D.
QTY
4
4
#S01
#S02
QTY
4 #L04D
Connector Profile
4.2A
S01
L04D
S02
NOTE: ALL VIEWS ARE FROM INSIDE.
27 of 56 www.stcny.com