Systemline S6.2, Руководство по установке

Страница: 12 / 24

PAGE
12
Section 3
•
Configuring the System
3.1 Installation
You will need to assign ID’s to each Touch
Screen keypad, configure the keypad inputs
as required and to load the .qrc learning file
created from the LRN7 Learning handset.
Installing the software on the host
computer using the supplied CD-ROM
Insert the CD-ROM.
1. If the CD-ROM does not automatically
start double click on the installer application.
2. Click on Next to start the installation
3. Click Next to install the SystemNet
Configuration Utility into the default location,
otherwise click browse to choose the
directory.
4. Click Next to start the installation
5. Click Close when the installation is
complete
6. Select the configuration utility from the ‘All
Programs’ menu.
7. You must connect your PC to the same
Ethernet network as the S6.2 unit in order
for the software to discover the system. Use
your WIFI or wired Ethernet connection on
the PC and connect to the network.
3 Configuring the S6.2 Controller and
Touchscreen Keypads Using a PC
The purpose of this application is to configure your installation using a PC.