T
able of Contents
PAGE
4
1 Preparing for the
installation 5
1.1 Preparing for the installation 5
Tools and equipment 5
2 Terminating the wiring
and fi tting the Systemline
Modular Components 6
2.1 Preface 6
2.2 Locating the speaker positions in each zone 7
Locating concealed cables 7
Clearance 7
Beware of joists 7
2.3 Cutting holes for ceiling speakers 8
2.4 Connecting the active (right-channel) ceiling
speaker 8
Connecting the system input 9
Connecting the keypad 9
Connecting the feed to the passive speaker 9
Spare cable 9
2.5 Connections required for additional
functionality 9
Local input 9
Power supply 10
Next (sub-zone) zone 10
2.6 Confi guring the active speaker 10
Mono operation 10
Disabling the LED display on IR equipped
speakers 10
2.7 Connecting the PLM2 passive speaker 10
2.8 Fitting the speaker into the ceiling 11
2.9 Fitting and connecting the KPM1 keypad (if
specifi ed) 11
Changing the keypad default setting 12
2.10 Fitting and connecting the local input SIM &
IRM modules (if specifi ed) 12
2.11 Fitting and connecting the hub 13
Mounting the hub and PSU 13
2.12 Connecting a hi-fi system or music source
component 13
Directly connected music source 13
Remotely connected music source 13
2.13 Connecting the PIM power input module for
sub-zones 14
2.14 Wiring for a single-zone system (no hub) 14
3 Testing the system 15
3.1 Test procedure 15
3.2 Completing the installation 15
4 Confi guring the system 16
4.1 Setting bass, treble, and minimum/maximum
volume levels 16
4.2 Setting the active speaker for mono
operation 16
4.3 Deactivating the LED display on an IR
equipped speaker 17
4.4 Setting the keypad to enable local input
toggle 17
4.5 Changing addresses for sub-zones and
expanded zones 17
Changing module addresses 18
4.6 Changing the hub setting to accept a direct
input 18
5 Troubleshooting 19
Golden rule 19
Speaker will not come out of standby. The red
standby indicator blinks continuously 19
Speaker will not come out of standby. Red
standby indicator remains illuminated 19
Speaker switches on, with the blue indicator
illuminated, but there is no sound 19
Testing sub-zones 19
Sound breaks up and becomes unstable at
high volume settings 19
Some zones sound too loud when fi rst
switched on 20
6 Operating the system 21
Turning a zone on 21
To adjust the listening volume 21
To select the local source 21
To switch back to system input 21
To mute the system 21
To switch the zone off 21
Sub-zone operation – independent operation 21
