PAGE
2
Declaration of Conformity
Systemline Modular has been designed
and independently tested to be in
compliance with the following standards:
BS EN 60065: 1998 / IEC 60065: 1998
(safety) incl. Australian Deviations
EN 55013, EN 61000-3-2, EN 61000-3-3, EN
55020 (EMC)
AZ/NZS 1053 (Australia/New Zealand
emissions)
47 CFR part 15 (FCC for United States)
Nemko LVD Certifi cate
EMC/AZ/NZS/FCC (including SEQAL EMC
Certifi cate & Test Report)
CB Report: (including CENELEC
modifi cations and national deviations for
Europe)
AUS/NZ deviations CB report appendix:
CB Certifi cation.
Safety
This Symbol is to alert the user to the
presence of dangerous voltages inside
the Systemline Modular Power supplies.
To reduce the risk of electric shock do not
dismantle these power supplies.
This symbol is to alert the user of
important operating instructions included
on the CD-Rom accompanying the
Systemline Modular.
Read all the instructions before connecting
or operating the Systemline Modular.
Pay particular attention to the safety
information. Keep this manual so you can
refer to the safety instructions.
WARNING:
There are no user serviceable
parts inside. Refer all servicing issues to
qualifi ed personnel.
WARNING:
To reduce the risk of fi re
or electric shock, do not expose the
Systemline Modular to moisture or water.
Do not allow foreign object to get into any
part of Systemline modular. If moisture
or foreign bodies get inside any part,
immediately disconnect the power cord
from the wall. Obtain assistance from a
qualifi ed service person. No objects fi lled
with liquids, such as vases, shall be placed
on any part of Systemline Modular.
That no naked fl ame sources such as
candles should be placed on any part of
Systemline Modular.
Ventilation should not be impeded.
Ensure that the Systemline modular
components are fi tted in accordance with
their individual installation instructions.
