Main menu item
Sub-menu item 1
Sub-menu item 2
Explanations
Active
Cooling
recovery
No
Status of the cooling recovery
function
External set
point
Not active
Status of the external set point
→
Alarm events
Alarm log list along with the
time and date they occurred
Move down and up in the list by
pressing ↑↓
→
Input/ Output
→
AI
Status of the Ananlogue inputs
→
DI
Status of the Digital inputs
→
UI
Status of Universal Analogue
inputs or Universal Digital
inputs.
→
AO
Status of the Analogue outputs
→
DO
Status of the Digital outputs
→
Temperature
Extract air
temp
Act.:
ºC
Setp:
18.0ºC
Configured temperature control
(Default is
Extract air
temp
)
Actual temperature in the
chosen control mode
Temperature for the chosen
control mode
If cascade
control
Max/min supply
setp.
Max:
30ºC
Min:
12.0ºC
Set the maximum and minimum
allowed supply air temperature
in case of cascade control
Logon to service level needed
to change settings
Outdoor temp:
ºC
Supply air temp
Actual:
ºC
Setp:
18ºC
Actual outdoor air temperature
Actual supply air temperature
Calculated supply air set point.
The exhaust air controller
output signal generates the
supply air controller’s set point
value.
Frost
protection
Actual:
ºC
Actual water temperature in the
water heating battery. (Only
visible for HW units)
Exhaust air
temp
Actual:
ºC
Actual exhaust air temperature.
→
Time settings
→
Time/Date
Set correct time and date.
Operation and Maintenance Instructions
132616
13
Systemair Sverige AB
