SystemAir PAW-200W5APAC, Руководство по установке и обслуживанию

Страница: 13 / 44

11
English
3.1 Inspection
The unit shall be immediately inspected upon receipt to identify any
damage, since it has been delivered ex works and transported at the
customer’s risk. It is also necessary to make sure that all the parcels
specified on the delivery note have been delivered.
Any damage shall be immediately reported in writing to the carrier.
Even if the damage is only on the surface, please also notify our local
representative.
The manufacturer disclaims all responsibility for the shipment even if
it has been provided for its organisation.
3.2 Handling
Before handling the devices, make sure the site you have chosen for
the installation can withstand its weight and support its mechanical
impact.
WARNING
Do not lay the WHE unit on its side during
transportation. Internal damage could result in
malfunction
NOTE
Handle with Care. Lifting must be done from
the bottom or from the backrest; do not lift by
levering on protruding parts of the machine; use
a manual or mechanical lift if necessary
3.3 Storage
If the unit is to be stored for some time prior to installation, take at
least the following precautions to prevent damage, corrosion and/or
deterioration:
n
Make sure all openings, such as for example water connections,
are well plugged and sealed.
n
Maximum storage temperature is 40 °C.
n
Minimum storage temperature is 0 °C.
n
Store the units in areas where minimum activity is likely to take
place in order to avoid any risk of accidental damage.
n
Never use steam to clean the unit.
It is also recommended to visually inspect the equipment at regular
intervals.
3 - Transport, Handling and Storage
3.4 Anchoring
Floor mounting
For floor mounting application, use the support supplied loose with
the unit, as shown in figure.
Wall mounting
420
210 210
550
450
13
6
DANGER
Danger in case of improper fixing
The fixing material used must be suitable for
the characteristics of the wall.
Fixing material is not included since different
wall materials require different types of fixing
devices.
Check that the wall is able to support the
weight of the unit in operation
Use fixing material suitable for the
characteristics of the wall
Use individual supports if necessary
420
210 210
550
450
13
6