Method 1
This method applies for sections that end in joint
mullions:
•
Check that the four corners are attached.
Fig. 16 - Joint mullions with linking corner pieces
•
Ensure that the sealing tape supplied is fixed to
one of the two sections, before moving the sections
against each other.
Fig. 17 - Fixing the sealing tape to the joint
mullions
•
Use the pre-mounted corners for the final
positioning of the sections and secure the corners
with a bolt. The sections must be fully aligned.
Fig. 18 - Corner connection
•
Remove the first two corners and mount the
aluminium connection strip to the base. Remove
the next two corners and mount the connection
strip against the side wall. Repeat this for the other
AHU corners.
Fig. 19 - Fixing the connection strip
Method 2
This method applies for sections that end with corner
posts.
Fig. 20 - Corner posts with coupling profile
•
Ensure that the sealing tape supplied is fixed to
one of the two sections, before moving the sections
against each other.
Fig. 21 - Fixing sealing tape to the corner posts
HHFlex Air Handling Units
| 7