SystemAir AC-RSR105R32HEC, Руководство по установке и обслуживанию

Страница: 23 / 79

When several SYSAER R32 units are installed, ensure proper clearance is implemented around the
condensers specific to each machine.
Caution
2000
2000
2000
2000
2000
21 SYSAER R32
Depending on temperature and outdoor air humidity conditions, water vapour contained in the air can
condense on the finned heat exchanger and even form ice under low outdoor temperature conditions (around
< 5°C). This condensate water and defrosted water runs off via outlets provided under the exchanger. To aid
water run-off and avoid frozen water remaining in the appliance in winter, we recommend that it is mounted
at a height of around 10cm off the ground. In this way, condensate and defrosted water can run off freely
and be absorbed into the ground or channelled to a basin built under the appliance in order to protect the
environment.
In areas where outdoor temperatures fall below 1°C, the system can be equipped with a condensate anti-
freeze protection system (e.g. a heated pipe sheath, Not supplied).
In order to contain noise levels, we equip our appliances with quiet fans and encase the technical compartment
in sound-proofed panels. However, noise levels can be reduced even further by following a few installation
precautions:
²
Do not install the appliance near a window.
²
Do not install the unit in enclosed or confined yards, narrow locations where noise may be reflected
on walls
²
Avoid locating the appliance in a corner (increased reverberated noise).
²
Install the rubber pads supplied or anti-vibration pads (available as an option) under the appliance.
²
Do not join the concrete slab supporting the appliance to the structure of the dwelling (structure-
borne noise transmission).
²
Electrical and hydraulic connections to the unit must be flexible to avoid transmitting vibrations.
Also Compressors are a typical source of annoying noise, so for the SYSAER R32 they are mounted with
acoustic jacket that can substantially reduce the resulting noise emissions. For an easy installation our
jackets are equipped with clips and adjustable straps that allows ideal adaptation to compressor dimensions.
Those jackets are composed of a PVC outer surface: robust, weather-resistant and easy to clean.
10.1.2. CONDENSATE WATER MANAGEMENT IN HEATING MODE
When choosing the location for
the SYSAER R32 , take care to
leave sufficient free clearance on
all sides to ensure easy access for
maintenance work.
The minimum free clearance
dimensions indicated must be
observed to ensure both proper
system operation and allow access
for maintenance and cleaning.
10.1.3. HOW TO REDUCE NOISE POLLUTION
10.2. CLEARANCE