Never submit the metal work (panels, posts) of the
SYSAER R32
to handling constraints, as only its
base is designed for that purpose.
Caution
The forklift must be fitted with forks with a minimum length of 2.5m.
Caution
11
SYSAER R32
The good method of handling depends on the model of
SYSAER R32
and its final destination.
²
Take care to avoid any rough handling or impacts when unloading and moving the appliance.
²
Before hoisting into position, test lift to insure stability and balance. Avoid twisting or uneven lifting
of the units.
²
The units shall be carefully inspected before unit installation to make sure this has not happened.
²
ll these sections have been inspected before leaving the factory. It is important to insure that no
bolts, screws or other fixing system are loosened or missing before the commissioning.
7.3. MANUTENTION GENERALITES
7.3.1. HANDLING WITH A FORKLIFT
When a forklift is used to handle the
SYSAER R32
units, lift them only along their width.
Place a safety wedge between the unit base and the fork lift truck to avoid damaging the unit’s structure
and casing.
Содержание AC-RSR105R32HEC
Страница 2: ......
Страница 43: ...APPENDIX ANNEXE ANLAGE ALLEGATO ANEXO APPENDIX ANNEXE ANLAGE ALLEGATO ANEXO...
Страница 78: ......