Operation
1
3
2
Fig. 22: Removal of the control unit
►
Insert the key and turn in the direction of the arrow until the fl ow of water stops.
1
2
Fig. 23:
Closing the isolating valve
Attention!
Potential material damage through improper installation!
Due to the manipulation, the control unit does not yet fi t on the
device!
►
Do not place the control unit on the casing for recommissioning!
►
Plug in the 7 pole adapter (1) again.
►
Connect the control unit with the power supply or insert batteries.
►
Select “closed position” on the control unit and wait until the control unit is in
“closed position”.
►
Remove the key.
►
Then install the control unit and fi x it with the clamp.
►
Put back the two insulating shells.
The device is ready to run again.
31
