Stratabox Firmware Flash update instructions
It is recommended you print these for reference while completing your firmware update.
1. Uninstall the old versions of Stratabox software.
2. Install the new version of Stratabox software provided to your PC.
3. Connect the Stratabox power and data cable to the Stratabox. Do not power it on.
4. Using Windows Explorer go to the C:\Program Files\SyQwest\StrataBox\Firmware\10kHz
directory and copy the StrataFW.hex file and place it into the “Stratabox” directory.
5. Then power on your Stratabox, the software will then prompt you. New firmware detected do
you wish to proceed with the update? Click the yes button and it will update the flash memory
device on the DSP.
6. When the update is completed cycle power on the Stratabox and you should see a flashing green
light.
7. Turn on the Stratabox software and click Help, About and it should show the following:
Software 3.0.8.1
Firmware 48
