Synway Information Engineering Co., Ltd
The ports in the port group. If the checkbox before a port is grey, it indicates that the
port is not available or has been occupied. All selected ports for a port group will be
displayed in the
Ports
column in Figure 3-20. Note: When a port group contains
multiple ports, the automatic call forward feature is invalid.
Port
After configuration, click
Save
to save the settings into the gateway, click
Reset
to restore the
configurations, or click
Cancel
to cancel the settings.
Click
Modify
in Figure 3-20 to modify the properties of a port group. See Figure 3-22 for the port
group modification interface. The configuration items on this interface are the same as those on
the
Add New Port Group
interface.
Figure 3-22 Modify Port Group
To delete a port group, check the checkbox before the corresponding index in Figure 3-20 and
click the ‘
Delete
’ button.
Check All
means to select all available items on the current page;
Uncheck All
means to cancel all selections on the current page;
Inverse
means to uncheck the
selected items and check the unselected. To clear all port groups at a time, click the
Clear All
button in Figure 3-20.
3.6 Route Settings
Route Settings is used to specify the routing rules for calls on two directions: IP
Æ
Tel and Tel
Æ
IP.
See Figure 3-23.
Figure 3-23 Route Settings
SMG Series Analog Gateway User Manual (Version 1.0)
Page 27