manualshive.com logo in svg

Synway SMG1008, Руководство пользователя, Страница: 27 / 54

Поделиться
Скачать
Synway SMG1008 Скачать руководство пользователя страница 27

                                                           

Synway Information Engineering Co., Ltd

 

Item 

Description 

Port 

Serial number of the port on the device. This item is not configurable. 

Type 

Type of the port on the device, either FXS or FXO. This item is not configurable. If it 

shows “---”, that means the port is unavailable due to the absence or damage of the 

corresponding module. 

SIP Account 

When the port initiates a call to SIP, this item corresponds to the username of SIP; 

when the port initiates a call to PSTN, this item corresponds to the displayed 

callerID. 

Auto Dial 

This number will be automatically dialed by the FXS port if there is no dialing 

operation after pickup within a designated time period (i.e. 

Wait Time before Auto 

Dial

). The parameter 

Wait Time before Auto Dial

 can be configured on the FXS 

port modification interface. 

DND 

Do Not Disturb. If this feature is enabled, the FXS port will reply the 403 message to 

reject all incoming calls. 

Forward 

The automatic call forward feature for the FXS port. Once this feature is enabled, 

the FXS port will forward incoming IP calls according to the preset 

FWD Type

. 

Note: To enable this feature, do not put the FXS port into a port group with other 

ports. 

FWD Type 

Forward conditions for the FXS port to forward incoming IP calls. The optional 

values are: 

Option Description 

Unconditional 

The FXS port will forward all incoming IP calls to the preset 

FWD Num 

immediately when it receives them. 

Busy 

The FXS port will forward incoming IP calls to the preset 

FWD 

Num

 if busy when it receives them. 

The FXS port will forward incoming IP calls to the preset 

FWD 

Num

 if the corresponding station does not answer them in a 

designated time period (i.e. 

Time for No Reply Forward

). Only 

when this forward condition is selected does the configuration 

item 

Time for No Reply Forward

 on the FXS port modification 

interface become valid. 

No Reply 

This item can be configured on the FXS port modification interface and is valid only 

when 

Forward

 is set to 

Enable

. 

FWD Num 

The number to which the incoming IP call is forwarded. If the 

Forward

 feature is 

enabled, this item should not be left empty. 

CID 

CallerID. If this feature is enabled, the FXS port will send the callerID of the 

incoming IP call together with the ringing tone to the corresponding station. 

Call Waiting 

If this feature is enabled, the FXS port while in conversation can accept another call 

from IP and keep it in the waiting state. Once the current conversation is finished 

and the station hangs up, the call in the waiting state will ring the station and wait for 

answer. 

SMG Series Analog Gateway User Manual (Version 1.0)           

                                     Page 22 

Содержание SMG1008























































Отзывы:

Нет отзывов