Synway Information Engineering Co., Ltd
Figure 3-13 Modify Dialing Rule
To delete a dialing rule, check the checkbox before the corresponding index in Figure 3-11 and
click the ‘
Delete
’ button.
Check All
means to select all available items on the current page;
Uncheck All
means to cancel all selections on the current page;
Inverse
means to uncheck the
selected items and check the unselected. To clear all dialing rules at a time, click the
Clear All
button in Figure 3-11.
3.4.3 Dialing Timeout
Figure 3-14 Dialing Timeout Info Interface
See Figure 3-14 for the dialing timeout info interface. The table below explains the items shown in
the above figure.
Item
Description
Sets the largest interval between two digits of a dialing number. All digits of a dialing
number should be dialed one by one with intervals less than this value. If you do not
dial a digit after previous ones until the time passing by goes longer than this value,
all the previous digits you dialed will be regarded as a whole to constitute the dialing
number. Range of value: 1~10, calculated by s, with the default value of 6.
Inter Digit Timeout
More information about the configuration item
Inter Digit Timeout
, such as the
reason for adopting the current value.
Description
Click
Modify
in Figure 3-14 to modify the dialing timeout info. See Figure 3-15 for the dialing
timeout info modification interface. The configuration items on this interface are the same as those
on the
Dialing Timeout Info Interface
.
SMG Series Analog Gateway User Manual (Version 1.0)
Page 20