Synway Information Engineering Co., Ltd
z
SHT-16B-B2/cPCI rear connection panel
Figure 2-4 SHT-16B-B3/cPCI
Note:
At present, there are two models of rear connection panel provided for use with the
SHT-16B-CT/cPCI 2.0, SHT-16B-CT/cPCI/FAX 2.0 or SHT-16B-CT/cPCI/MP3 2.0 board. They are
SHT-16B-B2/cPCI and SHT-16B-B3/cPCI. Users can choose either of them depending on real
situation. The instruction below shows you how to make choice between the two models.
1)
When using the ringing current & battery feed power supply from Synway, you should choose
SHT-16B-B2/cPCI and properly configure the jumpers on the SHT-16B-CT/cPCI 2.0,
SHT-16B-CT/cPCI/FAX 2.0 or SHT-16B-CT/cPCI/MP3 2.0 board before using this rear
connection panel.
2) When using the IPC mainboard to supply both the ringing current and the battery feed (via
–VBAT, VBTRTN, VRG and VRGRTN on the mainboard), you should also choose
SHT-16B-B2/cPCI and prope
pers on the SHT-16B-CT/cPCI 2.0,
SHT-16B-CT/cPCI/FAX 2.0 or SHT-16B-CT/cPCI/MP3 2.0 board before using this rear
Figure 2-3 SHT-16B-B2/cPCI
z
SHT-16B-B3/cPCI rear connection panel
cPCI Connector with Alignment Pin
Ring Generator
cPCI Connector with Alignment Pin
rly configure the jum
SHT-16B-CT/cPCI 2.0, SHT-16B-CT/cPCI/FAX (MP3) 2.0 Hardware Manual
(Version 2.2)
Page 8
