Synway Information Engineering Co., Ltd
This module contains an analog trunk channel and a station channel, ensuring safe
communication via an automatic direct connection of the analog trunk channel and the
station channel when the driver is not running or the PC is powered off. See Figure 2-10
and Figure 2-11 for details.
z
Trunk-Record Composite Module
This module embraces two channels. One is for high-impedance recording in parallel
and the other works as an analog trunk. See Figure 2-12 and Figure 2-13 for more
information.
z
Magnet Module
This module enables the direct connection of its corresponding channel with a magnet
phone line so that to simulate the functions provided by magnet telephones. Refer to
Figure 2-14 and Figure 2-15 for details.
z
EM2V100 Module
A single EM2V100 module can transfer 2-line voice data and meanwhile perform EM
control. Two EM2V100 modules can be used either as two EM trunk channels each of
which carries 2-line voice data or an EM trunk channel which carries 4-line voice data.
To use two EM2V100 modules, set 2 voice lines for incoming calls and another 2 voice
lines for outgoing calls, and select one from the two pairs of E&M lines to perform EM
control. See Figure 2-16 and Figure 2-17.
See below for the connection of the EM2V100 module.
SHT-16B-CT/cPCI 2.0, SHT-16B-CT/cPCI/FAX (MP3) 2.0 Hardware Manual
(Version 2.2)
Page 5
