Synway Information Engineering Co., Ltd
connection panel.
3)
When respectively using the IPC mainboard to supply the battery feed (via –VBAT and VBTRTN
on the mainboard) and the voice board to offer the ringing current, you should choose
SHT-16B-B3/cPCI and properly configure the jumpers on the SHT-16B-CT/cPCI 2.0,
SHT-16B-CT/cPCI/FAX 2.0 or SHT-16B-CT/cPCI/MP3 2.0 board before using this rear
connection panel.
Refer to ‘Installation Procedure’ below in this file for detailed information about the jumper configuration
for these voice boards.
z
Indicators and interfaces on the SHT-16B-CT/cPCI 2.0 board and its rear
connection panel
Figure 2-5 Indicators
nection Panel
The above indicators and interfaces function as follo
& Interfaces on Board and Rear Con
ws:
Indicators for 16 Channels
Lamp Status
Channel State
ON operating
Green Lamps
OFF on-hook
Table 2-1 Indicators for 16 Channels
Run Indicator
Lamp Status
Runtime Status
Green Lamp
ON
not running
Indicator for Ch.1
•
•
•
Indicator for Ch.16
SH
T
-16B-
C
T/
cPCI
HOT
SWAP
1
2
3
4
7
8
9
10
11
12
13
14
15
16
ERR
RUN
5
6
SYNWAY
P&R
SPK
1
4
7
8
9
10
11
12
13
14
15
16
Hot-swap Indicator
Error Indicator
2
3
Run Indicator
5
6
RJ11 Jack for Ch.1 and Ch.2
•
•
•
RJ11 Jack for Ch.15 and Ch.16
DB44 Connector
P&R
SPK
SHT-16B-CT/cPCI 2.0, SHT-16B-CT/cPCI/FAX (MP3) 2.0 Hardware Manual
(Version 2.2)
Page 9
