Synthes
49
Instruments
03.620.021 Template for Transverse Connectors
low profile, for Rods
6.0 mm
314.070 Screwdriver, hexagonal, small,
2.5 mm,
with Groove
Use the template to measure the distance between the rods.
Select a transverse connector of a suitable length.
Ensure that the set screws of the transverse connector are
loose and insert the transverse connector. Tighten the set
screws at both ends firmly.
In the case of transverse connectors with variable angle, the
large set screw must also be tightened so that the angle re-
mains at the set position.
In the case of transverse connectors with variable length, the
set screw in the middle must be tightened so that the length
remains at the set position.
Note:
If any of the instrumentation has to be changed, all
the set screws in the transverse connector must be loosened.
Connecting Two Rods
Variation B: Connecting Two 6 mm Rods
with Low-profile Transverse Connectors
Содержание USS II
Страница 73: ...Synthes 71 ...
Страница 75: ......