Synthes MultiLoc Proximal Humeral Nail Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 60

background image

MultiLoc Proximal Humeral Nail

– Cannulated nails in right and left

designs, 8.0 mm and 9.5 mm diame-
ters, and 160 mm length, to ensure
optimal fit in the canal

– Straight nail for central insertion

point, to avoid potential insertion
through the fracture site, increasing
biomechanical stability

Angular Stable Locking System ASLS
(optional)

Improved fixation in poor bone quality.

MultiLoc Proximal Humeral Nail Technique Guide

Synthes

3

* Comparative testing was conducted by Synthes

with the MultiLoc Humeral Nail construct
implanted in polyurethane foam block material of
multiple densities. Static bend testing was
conducted to compare the stability of the nail
construct with and with out the secondary 3.5 mm
locking screws assembled with the proximal
lateromedial (LM) screws. The static bending force
was applied to the test constructs in an eccentric,
mediolateral direction.Testing was conducted with
the test sample constructs implanted in foam block
material with densities of 5.5 pcf (pounds per
cubic foot), 7.5 pcf, and 10 pcf. Failure was
defined as varus collapse of 10 mm or cutout of
the proximal screws. Results showed as much as a
45% increase in construct stability when the

��

– Ascending screw option to provide

support to the calcar

– Multiplanar distal locking options for

less implant toggling in the medullary
canal

– Fully targeted locking options for

accurate screw insertion

– Polyethylene inlay for secure screw

fixation

secondary 3.5 mm locking screws were assembled
with the proximal LM screws and the construct
was subjected to the static mediolateral bending
force. Test results showed that in 10 pcf foam
material, the MultiLoc Humeral Nail construct
failed at 315 N (mean) with secondary locking
screws assembled with LM screws vs. 230 N
(mean) without secondary locking screws. In 7.5
pcf foam material, the construct failure occurred at
141 N (mean) with secondary 3.5 mm locking
screws vs 123 N (mean) without secondary 3.5 mm
locking screws. In 5.5 pcf foam material, the
construct failed at 137 N (mean) with secondary
3.5 mm locking screws vs. 94 N (mean) without
secondary 3.5 mm locking screws.

«
...
3
4
5
6
7
...
»

Содержание MultiLoc Proximal Humeral Nail





























































Отзывы:

Нет отзывов

Похожие инструкции для MultiLoc Proximal Humeral Nail

Бренд: B&K Страницы: 8

Бренд: Omnia Страницы: 8

Бренд: Ecco Страницы: 2

Бренд: Landoll Страницы: 94

Бренд: Abus Страницы: 2

Бренд: Abus Страницы: 12

Бренд: Abu Garcia Страницы: 6

Бренд: Federal Signal Corporation Страницы: 4

Бренд: ParaBody Страницы: 7

Бренд: Jet Страницы: 12

Бренд: laerdal Страницы: 9

RIDA qLine ZG2601

Бренд: R-Biopharm Страницы: 23

Бренд: Yamaha Страницы: 139

Бренд: Yamaha Страницы: 19

Бренд: Yamaha Страницы: 32

Бренд: YASKAWA Страницы: 1166

Бренд: LSI Страницы: 24

Бренд: B medical systems Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды