Synthes MultiLoc Proximal Humeral Nail Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 60

background image

22

Synthes

MultiLoc Proximal Humeral Nail Technique Guide

1

Drill and determine screw length

Instrument

03.019.016 3.8 mm Three-Fluted Drill Bit, quick coupling,

calibrated, 270 mm

Insert the calibrated drill bit and drill carefully until the level
of the subchondral bone is reached. Confirm drill bit position
with the image intensifier.

Read the required length of the screw directly off the cali-
brated drill bit at the back of the drill sleeve. Press the drill
sleeve firmly to the cortex to ensure accurate measurement.

Remove the drill bit and drill sleeve.

Caution:

Do not penetrate the articular surface.

Proximal Locking

MultiLoc Screws

Alternative technique: Measure using depth probe

Instrument

03.019.029 Depth Probe for MultiLoc Humeral Nailing

System

Alternatively, the depth probe can be used for screw length
determination.

Assemble the depth probe with its outer sleeve.

Insert the depth probe through the protection sleeve and
advance it until resistance of the subchondral space is felt.
Monitor under imaging. Press the outer part of the depth
probe firmly to the cortex to ensure accurate measurement.
Read the screw length directly from the depth probe at the
back of the outer sleeve.

Note:

The orange marking on the depth probe will align

with the outer opening of the protection sleeve.

«
...
22
23
24
25
26
...
»

Содержание MultiLoc Proximal Humeral Nail





























































Отзывы:

Нет отзывов

Похожие инструкции для MultiLoc Proximal Humeral Nail

Бренд: Campbell Страницы: 18

Бренд: Vector Страницы: 4

Бренд: Omnia Страницы: 8

Бренд: C.M.O Страницы: 10

Бренд: Eaton Страницы: 2

Бренд: Eaton Страницы: 20

Бренд: Farmet Страницы: 102

Бренд: jablotron Страницы: 2

Бренд: jablotron Страницы: 2

Бренд: Raymarine Страницы: 124

Бренд: Raymarine Страницы: 192

Бренд: Landoll Страницы: 70

Бренд: Landice Страницы: 19

Бренд: Landice Страницы: 7

Бренд: Yamaha Страницы: 29

Бренд: Zimmer Страницы: 2

Бренд: ZipRip Страницы: 31

Бренд: Twiflex Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды