Synrad Pulstar P100 Series, Руководство оператора

Страница: 73 / 110

technical reference
3
25 Synrad Pulstar p100 operator’s manual
Pulstar p100 general specifications
Table 3-7
Pulstar p100 general specifications
Parameter Pulstar OEM p100
Output Specifications
Wavelength
†
.......................................... 10.5–10.7 µm
Average Power Output
1, 2
....................... > 100 W
Peak Power
3
............................................ > 390 W
Peak Pulse Energy
3
................................. > 190 mJ
Power Stability
4
..................................... ±7%
Power Stability
5
..................................... ±5%
Mode Quality ........................................ M
2
< 1.2
Beam Waist Diameter (at 1/e
2
)
6
............. 5.6 mm ±0.3 mm
Beam Divergence, full angle (at 1/e
2
) .... < 3 mrad
Ellipticity ............................................... < 1.2
Polarization ........................................... Linear, vertical
Rise Time
3
............................................. < 40 µs
Input Specifications
Power Supply
Voltage ........................................... 48 ±1.0 VDC
Current, max. .................................. 40 A
Command Input Signal
Voltage ........................................... +3.5 to +6.7 VDC (5V nominal)
Current .......................................... 10 mA @ +6.7 VDC
Frequency Range
7
.......................... Single shot–100 kHz
Duty Cycle Range
7
< 50 kHz .................................. 0%–37.5%
50–75 kHz ................................ 0%–31.5%
> 75 kHz .................................. 0%–25%
Pulse Length, max .......................... 600 µs
Logic Low State (Vmin–Vmax) ..... 0.0 to +0.8 VDC
Logic High State (Vmin–Vmax) .... +3.5 to +6.7 VDC
Cooling Specifications
Maximum Heat Load, laser ................... 2000 Watts
Flow Rate
8
............................................. 1.5–2.0 GPM, < 60 PSI
(5.7–7.6 lpm, <414 kPa)
Pressure Drop ......................................... 18 PSI @ 1.5 GPM/32 PSI @ 2.0 GPM
(124 kPa @ 5.7 lpm/221 kPa @ 7.6 lpm)
Coolant Temperature
8
............................ 18–22 °C