Synrad FH FLYER, Руководство оператора

Страница: 109 / 250

stand-alone
operation
SYNRAD FH Series Flyer Operator’s Manual Version 3.4
10 9
Configuration
Example: # use a combination of the first four inputs (IN0–IN3) to select one of 15 different
# mark files, where IN3 = 8, IN2 = 4, IN1 = 2, and IN0 = 1. The FileMask value
# should be 15 decimal or 0x0F hex.
FileMask=0x0F
# next step in Master Control File.
Keyword:
BitCount
Operation: Continuous, strobed
Required: No
Format:
“BitCount=arg1” where arg1 is a single value—either “8” or “16”.
Argument: The “8” for 8 bit or “16” for 16 bit, indicates the number of digital inputs to read. If
BitCount is not specified, Flyer defaults to “8”.
Notes: When BitCount is set to “16”, then two additional keywords—SetDigital16 and
Delay16—are valid keywords to use in the MCF.
Example: # there are more than 255 mark files (8 bits) to match, so we require a 16 bit input.
BitCount=16
# next step in Master Control File.
Keyword:
SetDigital16
Operation: Continuous, strobed
Required: No
Format:
“SetDigital16=arg1 arg2” where the arguments consist of decimal or hexadecimal
values.
Argument: Arg1 is a mask that defines the output bits to set or clear. Arg2 is the desired out-
put state.
Notes: When BitCount = 16, the SetDigital16 output command sets the specified output
state after reading the first byte (LSB) and prior to reading the second byte (MSB).
Use this output to signal that Flyer is ready to read the second input byte.
Example: # specify outputs OUT7 and OUT6 as the mask. OUT7 = 128 and OUT6 = 64,
# so mask value is 192 decimal or 0xC0 hex.
# The desired output state is OUT7 = 1 and OUT6 = 0, so the output
# value is 128 decimal or 0x80 hex.
SetDigital16=0xC0 0x80
# remember that a space is a data delimiter!
# next step in Master Control File.
Keyword:
Delay16
Operation: Continuous, strobed
Required: No
Format:
“Delay16=arg1” where arg1 is a single integer value.